GLTS is a division of Miller Machine & Grinding Service, Inc

DRIVERS

Prices are in US dollars (prices efective Nov. 8, 2012)
 We accept Purchase Orders from established firms.

 
click image to zoom Tools marked with K are included in the TK-2005

AM-KPSD ArvinMeritor™ - king pin seal driver

$94.00

For ArvinMetitor stearing axles. Kit includes 4 drivers for installing the following lower king pin bushing seals:

A-1205-X-1429
A-1205-Y-1428
A-1205-T-2334
A-1205-K-2117

Handle is long enough to reach through the upper knuckle.
Install seal on driver first, position in lower knuckle, and drive in with light taps!

 

 

 

 

 

 T-101 Bearing and Seal Driver Set
$144.00

Will assure correct installation of 15 bearings and 4 oil seals on 900 through 1800 foot pound transmissions. Various applications of Eaton print # T-18088-X Installs the following bearings:

81557, 81556, , 81547, 81057, 81052, 81012, 81008, 81007, 20015, 19551, 16780, 14366,14287, 8879, BS226539 (FRO)

(Supersedes T-105)

Seal numbers: 21036, 19109, 15087, 14337

These drivers will work in other applications where the sizes match bearing and seal diameters. Be sure contact in made with both inner and outer races to avoid damage to rollers or ball bearings.
K

 

 T-120 Input Shaft Bearing Driver
$58.50
Ease installation of hard to install input shaft bearings on most Fuller transmissions; both 1-3/4" and 2" shafts. 
K
T-120A Adaptor for T-120
$16.00
Adaptor allows T-120 to install input shaft bearings on 600/6600 series transmission. Also installs counter shaft bearing on early FRO models. Save time and prevent bearing damage. 

C-107 1" Bushing Driver
$25.50
For removal and installation of 1.000" bushing in clutch housing.
K
T-175 Driving maul and Soft Bar
$19.00
Repair transmissions the way the factory does. Soft steel maul and bar with knurled grip provides necessary weight to drive bearings and shafts easily and quickly. 
K
T-180 Sleeve Driver (613/6613 series)
$11.00
Installs 14993 snap ring on main shaft. Compresses springs in reverse gear retainer and seats snap ring in groove of main shaft. Various other uses.   
T-190 Rear Seal Driver
$94.00
Use to install # 14337, 19109, 21036, and newer 20807 seals without removing rear bearing housing. Steel version of plastic driver sold by Eaton (K-2413).  
T-192 Output Shaft Bearing Driver
$34.00
Used to install the tapered roller (cone) bearing on FRO (series 2) output shaft.  
T- 220 Counter Shaft Support and Bearing Driver
$42.00
Supports rear of counter shaft in FS-6106 while installing front bearing; also is used to install counter shaft rear bearing #6488. Eaton print # T-22913-C